Loading ...
Loading ...
Loading ...
Slide the locking ring
to remove.
Lift and separate
the housing.
Using a pair of scissors,
cut any hair or debris free
from around the brushes.
Removing blockages from the TurboTool
Re-tting the separator plate, shroud plate
Tabs
Line up the tabs on front of
housing and push together
to ret. Slide locking ring
into groove to secure.
Remove the hose from the vacuum cleaner
and telescopic extension tube.
Insert a broom handle or similar blunt
instrument into the hose to remove blockage.
Removing blockages from the hose
TIP
To test for a blockage
in the hose, drop a
small ball of paper
into the hose.
The paper will
drop through if
the hose is clear.
Taking care of your machine Let’s talk technical
Unscrew the shroud anti
clockwise and remove.
Tap the separator, shroud and separator plate over a bin to remove any dirt/debris. Using
a dry cloth wipe the remaining dirt /debris from the separator, shroud and separator plate.
Pull to remove the separator plate.
Line up and push the
separator plate into place.
Ret the shroud twisting
clockwise to lock
into place.
Twist the separator
anti clockwise to lock
into place.
Ret the dirt container pushing
down rmly until it clicks and
locks into place.
Line up the separator
making sure both
rectangular holes in
the dirt container and
separator line up.
Removing blockages from the Turbobrush
Switch the vacuum cleaner o and disconnect the power plug from the
electrical outlet.
Lay the Turbobrush on a at surface and turn over to expose the brushbar.
Using a pair of scissors, cut through any threads or hairs caught around the
brushes and brushbar.
Loading ...
Loading ...
Loading ...