Loading ...
Loading ...
Loading ...
Taking care of your machine
Cleaning the separator, shroud and separator plate
Post-motor lter maintenance
Push the post-motor lter
cover release clip to the right
to remove the post motor
lter cover.
Pull the post motor
lter to the left and
remove the post
motor lter.
Check the post motor lter for discolouration.
Do not wash the post motor lter.
Remove dirt container
by pushing down the dirt
container release button and
lifting the dirt container.
Hold the dirt container over
a bin. Push down the dirt
release clip at the bottom
of the dirt container.
The dirt release door will
open allowing dirt/debris
to fall out.
Emptying and cleaning the dirt container
Taking care of your machine
IMPORTANT: Always switch o and unplug the vacuum cleaner from the electrical socket before assembling,
opening or emptying the dirt container, or before connecting/disconnecting the attachments.
Pre-motor lter should be tapped over a bin every 4-6 uses to remove dirt and debris. Do not use your vacuum
cleaner without all of the lters in place.
The motor is equipped with a thermal cut-out. If for any reason the unit should overheat, the thermostat will
automatically turn the unit o.
!
40˚C
MAX
24hr
TIP
Don’t over ll the
dirt container to
avoid blocking the
air ow through the
vacuum cleaner.
After emptying the dirt container, twist the separator
clockwise to unlock and lift to remove.
Lift the dirt bin lid
release clip. In a hinge
like manner lift open
the dirt bin lid.
Cleaning the Pre-motor lter
Pull the lter tab and
remove the pre-motor lter.
Tap the lter over a bin
to remove any dirt/debris.
Wash the lter under
running water
(40 degrees max).
Ret the pre-motor lter
into the dirt container
with the tab being visible.
Leave for 24 hours
or until fully dry
before replacing.
In a hinge like manner
close the dirt bin lid until
it clicks into place.
click!
CAUTION: Incorrect tting of the separator cap will reduce suction.
24hr
IMPORTANT: The post motor lter is designed to oer long life with no maintenance. The lter should
be checked periodically and when heavily discoloured it should be replaced. Please do not wash,
scrub or brush the lter as this will damage the lter
Loading ...
Loading ...
Loading ...