Loading ...
Loading ...
Loading ...
Correctly adjusted head restraint
General information
A correctly adjusted head restraint reduces the
risk of injury to cervical vertebrae in the event
of an accident.
Height
Adjust the head restraint so that its center is
approximately at eye level.
Distance
Adjust the distance so that the head restraint
is as close as possible to the back of the head.
Active head restraint
In the event of a rear-end collision with a cer‐
tain severity, the active head restraint automat‐
ically reduces the distance from the head.
In the event of wear and tear due to an acci‐
dent, or if otherwise damaged, have the active
head restraint checked and if necessary re‐
placed
Adjusting the height: electrical head
restraints
Push switch up or down.
Distance to the back of the head:
electrical head restraints
The head restraint is automatically reposi‐
tioned when the upper backrest is adjusted.
Adjusting the side extensions
Fold the side extensions on the head restraint
forward for increased lateral support in the
resting position.
Removing
The head restraints cannot be removed.
Memory function
Concept
The following settings can be stored and, if
necessary, retrieved using the memory func‐
tion:
▷ Diver's seat position.
▷ Exterior mirror position.
▷ Steering wheel position.
▷ Height of the Head-up Display.
General information
Two memory locations with different settings
can be set for each driver profile, refer to
page 44.
Settings for the backrest width and lumbar
support are not stored in memory.
Safety information
WARNING
Using the memory function while driving
can lead to unexpected seat or steering wheel
movements. Vehicle control could be lost.
There is a risk of an accident. Only retrieve the
Seite 59
Settings Controls
59
Online Edition for Part no. 01 40 2 915 604 - X/16
Loading ...
Loading ...
Loading ...