Loading ...
Loading ...
Loading ...
5
LOCATION OF PARTS
BEFORE USING FOR THE FIRST TIME
These models are designed for dispensing coffee only, and are not
recommended for storing perishable foods such as meats or dairy products.
After casters are attached and before connecting the appliance to the power
supply, leave it standing for at least 8 to 10 hours. This allows the refrigerant to
drain back into the compressor and reduces the risk of malfunctions in the
cooling system caused by shipping.
Clean the appliance thoroughly, especially the interior. (See Maintenance of the
Coffee Dispenser.) Proper grounding must be ensured to reduce the risk of
shock and fire. Do not cut or remove the grounding plug!
TIPS FOR SAVING ENERGY
Try not to open the door too often, especially when the weather is hot and humid.
Once you open the door, close it as soon as possible.
If possible, disconnect the power before changing a keg of coffee.
Keep the unit out of direct sunlight.
Periodically, check that the coffee dispenser seals well and that none of the
contents prevent the door from closing.
Coffee tower assembly
Upper cover guardrail
Drip tray
Display and control
panel
Evaporator
Ball valve
Coffee keg
Door
Bottom pad
Caster
Top cover
Cabinet
N
2
regulator valve
N
2
gas cylinder
N
2
tank supporter
Control board device
Compressor
chamber cover
Loading ...
Loading ...
Loading ...