Loading ...
Loading ...
Loading ...
LIQUID OR POWDER DETERGENT
A
The default position of
the flap is A (powder de-
tergent).
To use liquid detergent:
1. Remove the drawer.
Push the drawer edge in
the place with the arrow
(PUSH) to remove the
drawer easily.
B
2. Adjust the flap in posi-
tion B.
3. Put back the drawer in
the recess.
When you use the liquid detergent:
• Do not use gelatinous or thick liq-
uid detergents.
• Do not put more liquid then 120
ml.
• Do not set the delay start.
A
When the flap is in posi-
tion B and you want to
use powder detergent:
1. Remove the drawer.
2. Adjust the flap in po-
sition A.
3. Put back the drawer
in the recess.
SETTING A PROGRAMME
1. Turn the programme knob to switch the
appliance on and set the programme:
The indicator of the button Start/Pause flashes.
2. If necessary, change the temperature and the
spin speed or add available options.
When you activate an option, the indicator of the
set option comes on.
If you set something incorrect, the
indicator of button Start/Pause flashes
red.
STARTING A PROGRAMME WITHOUT THE
DELAY START
Press the button Start/Pause.
The corresponding indicator stops to flash.
The phase indicator illuminates and stays on.
The programme starts and the door locks.
The drain pump can operate for a
short time at the beginning of the
washing cycle.
STARTING A PROGRAMME WITH THE DELAY
START OPTION
1. Press the button Delay Start repeatedly to set
the required delay.
The indicator of the set delay comes on.
2. Press the button Start/Pause:
• The door is locked.
• The appliance starts the countdown.
• When the countdown is completed, the
programme starts automatically.
You can cancel or change the delay
setting before you press the button
Start/Pause. After pressing the button
Start/Pause, you can only cancel the
delay.
To cancel the delay start:
a. Press the button Start/Pause to set the
appliance to pause.
The corresponding indicator flashes.
b. Press the button Delay Start once; the
indicator of the set delay goes off.
Press the button Start/Pause again to start
the programme immediately.
INTERRUPTING A PROGRAMME AND
CHANGING THE OPTIONS
You can change only some options before they
operate.
1. Press the button Start/Pause.
The indicator flashes.
2. Change the options.
3. Press the button Start/Pause again.
The programme continues.
12
Loading ...
Loading ...
Loading ...