Loading ...
Loading ...
Loading ...
Programmes Load (kg)
Energy con-
sumption
(kWh)
Water con-
sumption (li-
tre)
Approximate
programme
duration (mi-
nutes)
Remaining
moisture (%)
1)
Standard 60°C cot-
ton
4 0,73 40 210 53
Standard 40°C cot-
ton
4 0,62 41 196 53
1) At the end of spin phase.
2) Not available for some models.
Off Mode (W) Left On Mode (W)
0.48 0.48
The information given in the chart above is compliant with the EU Commission regulation 1015/2010
implementing directive 2009/125/EC .
OPTIONS
TEMP
With this option you can change the default
temperature.
Indicator = cold water.
The indicator of the set temperature comes on.
SPIN
With this button you can set one of these options:
The indicator of the set option comes on.
• Automatic spin reduction
Set this option to decrease the maximum spin
speed to a half, but not less than 400 rpm.
Suitable for very delicate fabrics.
• Rinse Hold
Set this option to prevent the laundry creases.
The drum turns regularly to prevent the laundry
creases.
There is a water in the drum when
the programme is completed. The
door stays locked. You must drain
the water to unlock the door. To
drain the water refer to ‘At the end
of the programme’.
The appliance empties the water
out automatically after 18 hours
approximately.
QUICK
Press this button to decrease the programme
duration.
Set this option for items with light soil or items to
refresh.
The related indicator comes on.
EXTRA RINSE
With this option you can add some rinses to a
washing programme.
Use this option for persons allergic to detergents
and in areas where the water is soft.
The related indicator comes on.
1)
DELAY START
With this option you can delay the start of a
programme by 3, 6 or 9 hours.
The indicator of selected delay comes on.
1) See in "Settings" how to activate this option.
10
Loading ...
Loading ...
Loading ...