Loading ...
Loading ...
Loading ...
6
1. Loosen set screws and remove
pin and clip.
Remove the clip and pin from the downrod.
Then partially loosen the two set screws in
the yoke at the top of the motor assembly.
2. Feed the wires through the yoke
cover, canopy, and downrod.
Insert the downrod through the yoke cover,
canopy, and downrod.
3. Install the downrod into the
yoke.
Slide the downrod into the yoke at the top
of the motor assembly. Align the holes, and
reinstall the pin and clip. Then tighten both
set screws.
DOWNROD OR ANGLE MOUNTING
Clip
Clip
Pin
Pin
Set Screw
Set Screw
Downrod
Canopy
Yoke Cover
Yoke
Loading ...
Loading ...
Loading ...