Loading ...
Loading ...
Loading ...
11
7. Remove nial, nial cap, hex
nut and washer from the light kit.
Remove the nial, nial cap, hex nut and
washer from the threaded rod on the light
kit. Then, feed the pull chain coming from
the switch housing down through the
preassembled grommet.
8. Install the two E26-base LED
bulbs.
9. Install the glass bowl.
Feed the pull chain coming from the switch
housing through the o-center hole in the
glass bowl. Then, feed pull chain coming
from the center of the light kit through the
center hole in the glass bowl. Secure with
rubber washer and hex nut.
FINAL INSTALLATION
Hex Nut
Hex Nut
Rubber Washer
Rubber Washer
Finial Cap
Finial
Bulb
Loading ...
Loading ...
Loading ...