Loading ...
Loading ...
Loading ...
10
4. Attach the blades to blade arms.
Partially insert blade screw along with lock
washer and blade washer through one blade
and into one blade arm. Tighten each blade
screw, starting with the one in the middle.
Repeat this step for the remaining blades
and blade arms.
5. Attach blade arms to motor.
Install the blade arm to the underside of
the motor assembly with the ten previously
removed motor screws.
6. Connect light kit wires.
Remove the three switch housing screws
from the switch housing cap. Then, connect
the single-pin wire connectors from the fan
to the light kit -- blue to black and white to
white. Ensure the connectors are secure.
Then attach the switch housing cap to the
switch housing using the switch housing
screws.
FINAL INSTALLATION
x 3 x 3
Blade Washer
Lock Washer
Blade Arm
Blade Screw
Single-pin
Connector
Blade Arm
Motor Screw
Switch
Housing
Screw
Switch
Housing
Cap
Loading ...
Loading ...
Loading ...