Loading ...
Loading ...
Loading ...
EN8
MATERIALS SUPPLIED
Remove all the components from the packets. Check that all the components are included.
• Hood assembled with motor, lamps and grease lters tted (1 or 2 grease lters, depending on the model).
• Instructions for assembly and use
• 1 Assembly template
• 6 wall plugs Ø 8mm
• 6 screws Ø 5x45
• 2 screw Ø 3.5x7
• 2 washers Ø 16x2
• 1 outlet air grid
• 1 bracket chimney xing
• 1 VNRF
INSTALLATION – PRELIMINARY ASSEMBLY INSTRUCTIONS
The hood is designed for installation and use in “Extractor Version” or in “Filter Version”.
Extractor Version
Fumes are extracted and expelled to the outside through an exhaust pipe (not supplied) xed to the hood exhaust pipe connector.
Depending on the exhaust pipe purchased, provide for suitable xing to the exhaust pipe connector.
IMPORTANT: If already installed, remove the carbon lter/s.
Filter Version
Air is ltered through the carbon lter/s and recycled into the surrounding environment.
IMPORTANT: Check that air recirculation is facilitated.
If the hood does not have a carbon lter/s, order one/them and t it/them before use.
INSTALLATION DIMENSIONS
Adjacent wall units Adjacent wall units
600 mm min
centre line
70 cm (gas or combi cookers)
55 cm (electric cookers
hob surface
Loading ...
Loading ...
Loading ...