Loading ...
Loading ...
Loading ...
EN7
MAINTENANCE
WARNING:
- use safety gloves.
- disconnect the appliance from the mains power supply.
GREASE FILTERS
The metal grease lter has an unlimited life and should be cleaned once a month
by hand or in a dishwasher at low temperature and with a short cycle. Cleaning in
a dishwasher may cause discoloring of the grease lter, but its ltering eciency
is unaected.
Open the extraction panel (twist upwards).
Note: the panel does not need to be removed.
Pull out the handle to remove the lter.
Wash the lter and leave it to dry, proceeding in reverse order to ret.
CARBON FILTER (lter hoods only)
It retains the unpleasant odors produced during cooking.
Change the carbon lter every 4 months.
Fitting or replacing the carbon lter
1. Disconnect the hood from the power supply.
2. Open the extraction panel and remove it.
3. Remove the grease lters.
4. Fit one carbon lter each side, covering both protection grilles of the motor impeller. Turn the lters
clockwise to secure them to the middle pins.
Proceed in reverse order to remove.
Re-t the grease lters and extraction panel.
REPLACING HALOGEN LAMPS
1. Disconnect the hood from the household power supply.
2. Use a small screwdriver to gently prise (at the three points indicated) the lamp cover o.
3. Remove the burnt-out lamp and t a new one.
4. Re-t (snap-on) the lamp cover.
Lamp Power(W) Socket Voltage(V) Dimension (mm)
ILCOS D Code
(according IEC 61231)
20 G4 12
10 (Diameter)
22( Light Center Length)
HSGST/C/UB-20-12-G4-10/22
Loading ...
Loading ...
Loading ...