Loading ...
Loading ...
Loading ...
14 English
Using the cooktop burners
Using the cooktop burners
Size limitations
10 inches
or more
10 inches
or more
CAUTION
Do not place a pan or pot with a bottom
diameter of about 10 inches or more on
the RF or LF burner.
6 inches or less
CAUTION
Do not place a pan or pot with a bottom
diameter of about 6 inches or less on the
center grate. This cookware may tip over.
Use the rear burners for this small-sized
cookware.
Always make sure cookware handles are turned to the side or rear of the cooktop
and not over other surface burners. This will minimize the chance of burns,
spillovers, and the ignition of ammable materials that can occur if pots or pans
are bumped accidently.
If using glass cookware, make sure it is designed for cooktop cooking.
Never leave plastic items on the cooktop. They can melt or ignite. Heating a
sealed plastic container can cause a building up of dangerous pressure which can
cause the container to explode.
Make sure you hold the handle of a wok or a small one-handled pot while
cooking.
Cookware
Requirements
Flat bottom and straight sides
Tight-tting lid
Well-balanced with the handle weighing less than the main portion of the pot or
pan.
Material characteristics
Aluminum: An excellent heat conductor. Some types of food may cause the
aluminum to darken. However, anodized aluminum cookware resists staining and
pitting.
Copper: An excellent heat conductor but discolors easily.
Stainless steel: A slow heat conductor with uneven cooking performance but is
durable, easy to clean, and resists staining.
Cast-Iron: A poor conductor but retains heat very well.
Enamelware: Heating characteristics depend on the base material.
Glass: A slow heat conductor. Use only glass cookware that is specied for
cooktop cooking or oven use.
Heatproof Glass-Ceramic: Can be used for either surface or oven cooking. It
conducts heat very slowly and cools very slowly. Check cookware manufacturer's
directions to be sure it can be used on a gas cooktop.
NA5300R_DG68-01132A-00_EN.indd 14 2019-04-19  4:46:11
Loading ...
Loading ...
Loading ...