Loading ...
Loading ...
Loading ...
The machine will not start
Check
• that the door is properly closed.
• that the main power switch is on.
• that the Delayed Start option has not been
selected. To cancel Delayed Start, press the
Stop button for three seconds.
• that the plug is connected.
• that the main fuses have not blown.
• that the overheating cut-out has not been
triggered.
The machine loses all power during
a program
The overheating cut-out shuts off the tumble dryer
if the temperature is too high, e.g. because dust
is clogging the lint filter.
• Clean the lint filter.
• Wait until the machine has cooled then try
starting it. If it still does not start: Call the
service division.
Drying takes too long
• Check that the lint filter is not blocked. See the
Care and cleaning chapter.
• Empty the condensed water container and
check that the steamer filter and steamer are
not blocked. See the Care and cleaning
chapter.
Error messages
• If Over Flow appears on the display, the
condensed water container is full or the
steamer filter is blocked. Empty the container,
clean the filter and restart the machine. See
the Care and cleaning chapter.
• Read Drying takes too long in this chapter if
Max program time appears on the display.
• If Clean Lint Filter appears on the display, clean
the lint filter.
• If Clean condenser appears on the display,
clean the steamer. See the Care and cleaning
chapter.
• If Clean auto filter appears on the display,
clean the water filter. See the Care and
cleaning chapter.
• Call the service division if Thermistor fault
appears on the display.
• Press the Stop button to close any error
messages.
20
Troubleshooting
Loading ...
Loading ...
Loading ...