Loading ...
Loading ...
Loading ...
7
Drying program finished
The text Done appears on the display when
the program is finished. If the Anti crease
option has been selected, the drum will rotate for
three seconds per minute for two hours after the
program is finished.
The compressor’s cooling fan continues to run
after the program finishes, but stops automatically
or when any button/knob is activated.
Backlighting
Two minutes after the drying program finishes the
backlighting on the display and option buttons
enter energy saving mode.
Condensed water
The condensed water container must be emptied
after each load. Remove the condensed water
container, empty out the water and replace the
container. If the condensed water container
becomes full to overflowing, the program is
interrupted and Over Flow appears on the display.
Empty the container and press the Start button to
start a new program.
TIP!
The condensed water is decalcified and can be
used in steam irons. Pour it through a coffee
filter.
NOTE!
• Clean the lint filter in the outer door after each
load. See the Care and cleaning chapter.
• Clean the steamer and the steamer filter at
the intervals shown on the machine’s display
or more often.
• Empty the condensed water container after
each load.
WARNING!
If the lint filter becomes clogged, the machine’s
automatic overheating cut-out may be triggered.
Clean the filter, wait until the machine has
cooled then try starting it. If it still does not start:
call the service division.
Once drying has finished
Turn off the main power switch. Remove the
clothes and close the door to prevent small
children from climbing into the machine.
15
Tumble drying
Loading ...
Loading ...
Loading ...