Loading ...
Loading ...
Loading ...
5. Remove the foam filter found behind the net
filter.
6. Wash the foam filter in a washing machine
using a rinse or quick wash program. No
detergent or hot wash is necessary. The lint is
washed away and the filter is not damaged.
7. Clean the steamer by spraying water on the
ribs with a plant spray bottle. The lint runs off
together with the water, which is then
evacuated by the condensed water pump.
8. Replace both filters and close the steamer
door.
NOTE!
Avoid touching the ribs on the steamer. They are
very thin and easily damaged. If the ribs are bent
or damaged, the efficiency of the condenser is
greatly impaired, as is the drying result.
Cleaning the auto filter
The tumble dryer has a water filter that is found
under the condensed water container. Clean the
filter at the intervals shown on the machine’s
display or more often
1. Pull the water container out and up.
2. Unscrew and remove the filter.
3. Rinse the filter clean with water.
4. Screw the filter back into place by turning it
clockwise until it stops.
5. Replace the water container.
Cleaning the outside of the machine
Clean the outside of the machine and the program
panel with a mild cleaner. Do not use solvents,
as these can damage the machine. Do not hose
down or spray the machine with water.
NOTE!
Do not allow dust to accumulate around the
machine. Keep the area around the tumble dryer
clean and cool; dust, heat and moisture prolong
drying times.
19
Care and cleaning
Loading ...
Loading ...
Loading ...