Loading ...
Loading ...
Loading ...
www.insigniaproducts.com
23
NS-OTR16SS9 / NS-OTR16WH9
Step 5: Option B - Attach the mounting plate to the wall
1 Remove the rear wall template.
2 Remove the mounting plate from the upper foam.
3 Insert the bolt(s) through the front of the mounting plate into the hole(s) that are not going into a stud, and then
reattach the toggle wings ¾" onto each bolt. Hold your mounting plate up to holes in your wall to identify the correct
position.
4 Place the mounting plate against the wall and insert the toggle wings into the holes you drilled in the drywall. Pull the
mounting plate away from the wall to help tighten the toggle wings.
Note: The top of the mounting plate is indicated with an arrow. The mounting plate’s hooks are on the front.
Note: Depending on
your stud locations,
your installation may
look different. You
should insert toggle
bolts into drywall and
wood screws into
studs.
Bolt
Wing
Mounting plate
Loading ...
Loading ...
Loading ...