Loading ...
Loading ...
Loading ...
www.insigniaproducts.com
15
NS-OTR16SS9 / NS-OTR16WH9
5 Insert wood screw(s) through the mounting plate and into the hole(s) drilled in the stud(s), then tighten both the wood
screw(s) and toggle bolt(s) with a Phillips screwdriver to mount the plate. Make sure that the plate is centered before
tightening fully.
CAUTION: Be careful to avoid pinching your fingers between the back of the mounting plate and the wall.
You’ll need:
Mounting plate
Wall
Toggle wing
Toggle bolt
Wood screws
Mounting plate (Qty. 1)
Toggle bolts
Phillips screwdrivers
Loading ...
Loading ...
Loading ...