Loading ...
Loading ...
Loading ...
Starting the oven
Switch the control panel on by pressing the button.
The appliance buzzer sounds three times (ascending) and
all buttons light up in sequence.
Select the TOP/GRILL or BOTTOM oven by pressing the
TOP OVEN/ GRILL or BOTTOM OVEN icon.
Select the desired cooking mode by turning the
SELECTOR knob. The display shows:
- the temperature associated with the mode, if
programming manually;
- “Auto” and the duration alternately, if programming is
automatic.
4. Press the button to begin cooking.
5. The oven will begin its preheating phase, the preheating
indicators will light up as the temperature rises.
6. When the preheating process has nished, a buzzer
sounds and all the preheating indicator lights show that
this stage has been completed: the food can then be
placed in the oven.
7. During cooking it is always possible to:
- modify the temperature by turning the THERMOSTAT
knob (manual modes only);
- set the duration of a cooking mode (see Cooking Modes);
- press the button to stop cooking. In this case the
appliance stores the temperature modied previously in
its memory (manual modes only);
- switch o the oven by pressing button the for 3
seconds.
8. If a blackout occurs while the oven is already in
operation, an automatic system within the appliance will
reactivate the cooking mode from the point at which it
was interrupted, provided that the temperature has not
dropped below a certain level. Programmed cooking
modes which have not yet started will not be restored and
must be reprogrammed (for example: a cooking mode has
been programmed to start at 20:30. At 19:30 a blackout
occurs. When the power supply is restored, the mode will
have to be reprogrammed).
Cooling ventilation
In order to cool down the external temperature of the
oven, a cooling fan blows a stream of air between the
control panel and the oven door, as well as towards the
bottom of the oven door.
The cooling fan will not activate straight away when a
cooking mode is selected and the appliance is cold, but
only after the appliance has warmed up.
Once cooking has been completed, the cooling fan
continues to operate until the oven has cooled down
suciently.
Oven light
The light comes on when the oven door is opened or
when a cooking mode starts.
The button can be used to switch on/ switch off the
light at any time.
Residual heat indicators
The appliance is tted with a residual heat indicator. When
the oven is o, the “residual heat” bar on the display lights
up to indicate high temperatures inside the oven cavity.
The individual segments of the bar switch o one by one
as the temperature inside the oven falls.
Restoring the factory settings
The oven factory settings can be restored to reset all
selections made by the user (clock and customised
durations). To carry out a reset, switch o the oven, then
keep the SELECTOR knob turned while pressing the
button for 6 seconds. Once the restore procedure is
complete, a buzzer will sound.
The first time the button is pressed, the oven will
behave as if it is being switched on for the first time.
Standby
This product complies with the requirements of the
latest European Directive on the limitation of power
consumption of the standby mode. If no buttons are
pressed for 30 minutes and the control panel lock has not
been activated, the appliance automatically reverts to
standby mode. The standby mode is visualised by the high
luminosity “Watch Icon”. As soon as interaction with the
machine resumes, the system’s operating mode is restored.
Loading ...
Loading ...
Loading ...