Loading ...
Loading ...
Loading ...
15
6. After a few seconds, frothed milk is delivered from the milk
spout (D5) into the cup below. For drinks with coee, the
machine automatically makes the coee after delivering
the milk.
Please note: general indications when preparing all
milk based drinks
• If you want to interrupt preparation during delivery, press
any button.
• At the end of delivery, to increase the quantity of milk or
coee in the cup, just press and hold (within 3 seconds) the
button corresponding to the drink being made.
• Do not leave the milk container out of the refrigerator for
long periods. The warmer the milk (41°F/5°C is ideal), the
poorer the quality of froth produced.
9.5 Cleaning the milk container after every use
Important! Danger of burns
When cleaning the internal tubes of the milk container, a little
hot water and steam leak out of the frothed milk spout (D5).
Avoid contact with splashes of water.
“SET DIAL TO CLEAN” appears on the display (B4) each time you
use a milk function. To eliminate all milk residues, proceed as
follows:
1. Leave the milk container (D) in the machine (you do not
need to empty it);
2. Place a cup or other recipient under the milk spout (g.
24).
3. Turn the froth adjustment dial (D1) to “CLEAN” (g. 25). A
progress bar appears and gradually lls as the operation
proceeds together with “Cleaning underway”. Cleaning
stops automatically.
4. Turn the dial back to one of the froth selections.
5. Remove the milk container and always clean the connec-
tion nozzle (A8) with a sponge (g. 26).
Please note!
• To prepare a number of cappuccinos or milk based coees,
clean the milk container after you have prepared the last
drink only.
• The milk container can be kept in the refrigerator.
• In some cases, to clean you must wait for the appliance to
heat up.
9.6 Programming the quantity of coee and
milk in the cup for the CAPPUCCINO button
The appliance is set by default to automatically deliver standard
quantities. To change these quantities, proceed as follows:
1. Place a cup under the coee spouts (A7) and milk spout
(D5);
2. Press and hold the CAPPUCCINO button (B9) until the
name of the drink and “PROGRAM MILK” appear on the
display (B4);
3. Release the button. The appliance starts delivering milk;
4. Once the required quantity of milk has been delivered into
the cup, press the button again;
5. The appliance stops delivering milk and, if required for the
drink being prepared, after a few seconds the coee is de-
livered into the cup. The name of the drink and “PROGRAM
COFFEE” are displayed;
6. Once the required quantity of coee has been delivered
into the cup, press the button again. Coee delivery stops.
The machine is now reprogrammed with the new milk and cof-
fee quantities.
9.7 Programming the quantity of coee and
milk in the cup for MILK MENU drinks
The appliance is set by default to automatically deliver standard
quantities. To change these quantities, proceed as follows:
1. Place a cup under the coee spouts (A7) and milk spout
(D5);
2. Press the MILK MENU button (B10);
3. Press (B9) or (B10) (g. 6) until the required drink ap-
pears on the display (B4) (CAFFELATTE, LATTE MACCHIATO,
FLAT WHITE, MILK);
4. Press and hold the OK button (B3 - g. 7) until the name of
the drink and “PROGRAM MILK” appear on the display;
5. Release the button. The appliance starts delivering milk;
6. Once the required quantity of milk has been delivered into
the cup, press the OK button;
7. The appliance stops delivering milk and, if required for the
drink being prepared, after a few seconds the coee is de-
livered into the cup. The name of the drink and “PROGRAM
COFFEE” are displayed;
8. Once the required quantity of coee has been delivered
into the cup, press the OK button again. Coee delivery
stops.
The machine is now reprogrammed with the new milk and cof-
fee quantities.
10. DELIVERING HOT WATER
Important! Danger of burns.
Do not leave the appliance unattended while hot water is being
delivered.
1. Make sure the hot water spout (C6) is attached correctly
(g. 8);
2. Place a container under the spout (as close as possible to
avoid splashes);
Loading ...
Loading ...
Loading ...