Loading ...
Loading ...
Loading ...
59
en
Simple troubleshooting
Problem Cause Solution
Coffee is too “bitter”. Coffee is ground too finely.
Preground coffee is too fine.
Adjust the grinding level to a
coarser setting. Use a coarser
ground coffee.
Unsuitable type of coffee. Change the type of coffee.
Coffee tastes burnt. The brewing temperature is
too high.
Reduce the temperature, see the
section “Drink adjustment”.
Coffee is ground too finely.
Preground coffee is too fine.
Adjust the grinding level to a
coarser setting. Use a coarser
ground coffee.
Unsuitable type of coffee. Change the type of coffee.
Coffee is too “weak”. Coffee strength selected is
too weak.
Raise the strength of the
coffee, see the section “Drink
adjustment”.
Ground coffee jammed in the
coffee drawer.
Remove the ground coffee
drawer, clean and dry thoroughly.
Ground coffee sticks in
the coffee drawer.
Ground coffee sticks
together.
Do not press the ground coffee
firmly into the coffee drawer.
Coffee drawer is damp. Remove the ground coffee
drawer, clean and dry thoroughly.
The water filter does not
stay in position in the
water tank.
The water filter is not
mounted correctly.
Firmly press the water filter
straight down into the tank
connection.
Bean container sticks
when inserting.
There are beans in the
housing.
Remove the beans.
The coffee grounds are
not compact and are too
wet.
The grinding setting is too
fine or too coarse, or not
enough ground coffee has
been used.
Adjust the grinding unit to a
coarser or finer setting, or use
2 level measuring spoons of
ground coffee.
Grinding level adjustment
is stiff.
Too many beans in the grind-
ing unit.
Dispensing a drink from coffee
beans. Only make any subse-
quent changes to the grinding
level in small steps.
Brewing unit cannot be
inserted.
Brewing unit is in the wrong
position.
Insert the brewing unit according
to the instructions, see the
section “Cleaning the brewing
unit”.
Brewing unit is locked. Unlock the brewing unit, see the
section “Cleaning the brewing
unit”.
Protective cover of the
brewing unit cannot be
properly attached.
Brewing unit is not locked. Lock the brewing unit, see the
section “Cleaning the brewing
unit”.
There is water under the
drip tray.
This water is condensed. Do not insert drip tray without
cover.
Loading ...
Loading ...
Loading ...