Loading ...
Loading ...
Loading ...
32
HOW TO USE
ENGLISH
CAUTION
Do not apply excessive force while detatching or
y
assembling the storage bins.
Do not use the dishwasher to clean the storage bins
y
and shelves.
Regularly detach and wash the storage bins and
y
shelves; they can become easily contaminated by
the food.
To Remove the Glass
(Pantry drawer not shown for clarity)
Lift up the glass under the crisper cover.
y
Pull the glass up and out.
y
To replace Glide‘N’Serve
To remove, pull the drawer out to full extension.
y
Lift the front of the drawer up, then pull it straight out.
y
To install, slightly tilt up the front and insert the drawer
y
into the frame and push it back into place.
NOTE
Some bins may vary in appearance and will only fit in
one location.
Adjusting the Refrigerator Shelves
The shelves in your refrigerator are adjustable to meet your
individual storage needs. Your model may have glass or wire
shelves.
Adjusting the shelves to fit different heights of items will
make finding the exact item you want easier. Doing so will
also reduce the amount of time the refrigerator door is open
which will save energy.
Detaching the Shelf
Tilt up the front of the shelf and lift it straight up. Pull the
shelf out.
Assembling the Shelf
Tilt the front of the shelf up and guide the shelf hooks into
the slots at a desired height. Then, lower the front of the
shelf so that the hooks drop into the slots.
CAUTION
Make sure that shelves are level from one side to the
other. Failure to do so may result in the shelf falling or
spilling food.
Door Bins
The door bins are removable for easy cleaning and
adjustment.
1
To remove the bin, simply lift the bin up and pull
straight out.
2
To replace the bin, slide it in above the desired support and
push down until it snaps into place.
NOTE
Removing the fixed door bin is recommended to
reduce the risk of door bin scratches.
LOW
HIGH
LOW
LOW
HIGH
LOW
1
CAUTION
When you close the refrigerator door with
GLIDE’N’SERVE DRAWER opened, that the drawer could
be broken.
Loading ...
Loading ...
Loading ...