Loading ...
Loading ...
Loading ...
The valet key works only in the
ignition and the door locks. You can
keep the trunk, trunk release handle
and rear seat trunk access locked
when you leave your car and the
valet key at a parking facility. (See
Trunk, page .)
Youshouldhavereceivedakey
number plate with your set of keys.
You will need this key number if you
ever have to get a lost key replaced.
Keep the plate stored in a safe place.
When replacing keys, use only
Honda-approved key blanks.Your car comes with two master
keys and a valet key.
The master key fits all the locks on
your car:
• Ignition
• Doors
• Trunk
• Trunk release handle
• Rear seat trunk access
When you push the CANCEL button,
or tap the brake or clutch pedal, the
CRUISE CONTROL light on the
instrument panel will go out and the
car will begin to slow down. You can
use the accelerator pedal in the
normal way.
The system remembers the
previously-set cruising speed. To
return to that speed, accelerate to
above25mph(40km/h),thenpress
the RESUME/accel button. The
CRUISE CONTROL light comes on,
and the car will accelerate to the
same cruising speed as before.
Pressing the Cruise Control Master
Switch turns the system completely
off and erases the previous cruising
speed from memory. To use the
system again, refer to
.
89
CONTINUED
Instruments and Controls
Steering Wheel Controls, Keys and Locks
Keys
Using the
Cruise Control
79
KKEEYY
NNUUMMBBEERR
PPLLAATTEE
MMAASSTTEERR
KKEEYYSS
VVAALLEETT
KKEEYY
Main Menu
Table of Contents
Loading ...
Loading ...
Loading ...