Loading ...
Loading ...
Loading ...
Open the trunk. Determine which of the two bulbs
is burned out: stop/taillight/side
marker light or turn signal light.
Pull the bulb straight out of its
socket.
Push the new bulb straight into
the socket until it bottoms.
Reinstall the socket into the light
assembly by turning it clockwise
until it locks.
Testthelightstomakesurethe
new bulb is working.
Remove the socket by turning it
one-quarter turn counterclockwise.
Reinstall the trunk lining. Make
sure it is installed under the edge
of the trunk seal.
Remove the screw in the center of
the fastener on the side of the
trunk lining. Pull the lining back.
Put the fastener into the hole on
the side of the trunk lining.
Reinstall the screw.
1. 2.
3.
4.
5.
6.
7.
8.
Replacing Rear Bulbs
(in Fenders)
Lights
Maintenance
250
FFAASSTTEENNEERR
Main Menu
Table of Contents
Loading ...
Loading ...
Loading ...