Loading ...
Loading ...
Loading ...
8
Notice: This Chef’sChoice
®
Electric Food Slicer has been equipped with a
protective fuse to prevent the motor from overheating. In the unlikely event that
the fuse fails, a spare fuse has been supplied with your slicer. To remove the old
fuse, make certain that the Power Switch is in OFF position, that the power cord
has been unplugged, that the thickness plate is in the “0” position and the food
carriage is locked in place. Turn the slicer over with the motor cover resting on
the table as shown (Fig. 11). The fuse holder will be accessible. Unscrew the
fuse holder, pull out the old fuse and replace it with an approved new one.
Reinsert the holder with the new fuse into its proper location. Satisfactory
replacement fuses are available from Hollyland 50T, LittelFuse or Bussman.
All are Slo-Blo type, rated at 1.6AMP and 250V.
Hints for best results:
• Toslicemeatswaferthin,chillthoroughlybeforeslicing.
• Meatsshouldbeboneless,fruitsshouldbefreeofseeds.
• Foodswithanuneventexture,likeshorsteaks,areoftendifculttoslice.Partiallyfreezebeforeslicing.
• Atcanningtime,usetheslicertoquicklyslicecucumbersandonionsforattractivepickles…
applesforpies…vegetablesforthefreezer.
• Forfooddehydrators:producesthickorthinslicesofuniformthicknessforevendehydrating.
• Handyforslicinghomemadeorbakerybread:agreatcompanionforyourbreadmachine.
Service
This appliance is for household use only. No user-serviceable parts are inside. In the event service is
needed, you may return your food slicer to EdgeCraft Corp., where the cost of repair or electrical or
mechanical adjustment can be estimated before the repair is undertaken. Please include your return
address and a brief description of the problem or damage to the slicer on a separate sheet inside the box.
Send your slicer, insured and postage prepaid to:
EdgeCraft Corporation, 825 Southwood Road, Avondale, PA 19311 U.S.A. Telephone: 800-342-3255
Retain evidence of shipping for your protection. www.chefschoice.com
Limited Warranty: Used with normal care, this EdgeCraft product is guaranteed against defective material and workmanship for a period of one (1) year from the
date of original purchase (“Warranty Period”). We will repair or replace, at our option, any product or part that is defective in material or workmanship without charge
if the product is returned to us postage prepaid with dated proof of purchase within the Warranty Period. This warranty does not apply to commercial use or any
product abuse. ALL IMPLIED WARRANTIES, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE
WARRANTY PERIOD. EDGECRAFT CORPORATION SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow limitations
on how long an implied warranty lasts and some states do not allow exclusions or limitation of incidental or consequential damages, so the above limitations
or exclusions may not apply to you. This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
This product may be covered by one or more EdgeCraft patents and/or patents pending as marked on the product.
Conforms to UL Std. 982 Certified to CAN/CSA Std. C22.2 No. 1335.2.14 120 volts/60Hertz, 0.5A
© EdgeCraft Corporation 2015 S665200
Figure 11. Replacing the
fuse located underneath
motor housing.