Loading ...
Loading ...
Loading ...
E4
1 HOW TO MOUNT
E5
Mounting the Switch Box (Option)
1
Mount the switch box to the panhandle of the tripod,
using the attached clamp.
2
Connect the switch box to the lens, using the included
cable.
Switch Box Cable
“SW. BOX” Connector
Lens
Switch Box
Pan Handle
Clamp
Clamp fixing knob
Mounting the Accessories for IS
Operation (Only Models with IS
Function)
Mounting the IS operation unit
1
Plug the connector of the IS operation unit into the
receptacle labeled “AUX” on the left side of the lens
(as viewed from the camera).
2
The IS Indicator unit on the other branch of the cable
comes with an anchoring screw. Mount it to the
location (such as on the edge of the viewnder) where
the ON/OFF status of the LEDs can be observed.
The IS indicator unit is not necessary for the camera
equipped with display function.
Lens
IS Operation Switch
Fixing Belts
IS Indicator Unit
(or Viewnder)
“AUX (IS Controller)”
Connector
Seeing the IS operating statuses in the
viewnder
When using a camera provided with a function for receiving
the signals indicating that the IS function is operating or
stopped from the lens side and displaying this operating
status on its viewnder, it is possible to connect only the IS
Operation Switch and operate it to perform these functions.
Remove the IS indicator unit that is connected partway
along the cable from the IS operation unit.
Mounting the Macro Controller
(Option)
1
Loosen the large and small lock knobs of the clamper,
then mount the clamper to the left pan handle of the
tripod.
2
After mounting the clamper to the pan handle of the
tripod, tighten the large and small lock knobs of the
clamper to secure the clamper.
3
Mate the rose joint of the macro controller with the
rose joint of the clamper.
4
Tighten the mounting knob of the clamper to rmly
secure the zoom demand.
Loading ...
Loading ...
Loading ...