User Manual - Page 157

For RAM 2013 3500.

Loading ...
Loading ...
Loading ...
JUMP-STARTING
If your vehicle has a discharged bat-
tery it can be jump-started using a set
of jumper cables and a battery in an-
other vehicle or by using a portable
battery booster pack.
Jump-starting can be dangerous if
done improperly so please follow the
procedures in this section carefully.
NOTE:
When using a portable battery booster
pack follow the manufacturer’s operating
instructions and precautions.
Preparations for Jump-Start
The battery in your vehicle is located
in the front of the engine compartment, behind the left headlight assembly.
NOTE:
The positive battery post is covered with a protective cap. Lift up on the cap to gain
access to the positive battery post.
Set the parking brake, shift the automatic transmission into PARK and turn the
ignition to OFF.
Turn off the heater, radio, and all unnecessary electrical accessories.
If using another vehicle to jump-start the battery, park the vehicle within the
jumper cables reach, set the parking brake and make sure the ignition is OFF.
Jump-Starting Procedure
Connect the positive (+) end of the jumper cable to the positive (+) post of the
discharged vehicle.
Connect the opposite end of the positive (+) jumper cable to the positive (+) post
of the booster battery.
Connect the negative end (-) of the jumper cable to the negative (-) post of the
booster battery.
Connect the opposite end of the negative (-) jumper cable to a good engine ground
(exposed metal part of the discharged vehicle’s engine) away from the battery and
the fuel injection system.
Start the engine in the vehicle that has the booster battery, let the engine idle a
few minutes, and then start the engine in the vehicle with the discharged battery.
WHAT TO DO IN EMERGENCIES
155
Loading ...
Loading ...
Loading ...