Loading ...
Loading ...
Loading ...
MULTIMEDIA 393
Depending on the vehicle options, feature
settings may vary.
To change features, select the desired feature.
This will bring you to the available options for
the feature. Change feature settings as desired
by pressing and releasing the preferred setting
option until a check-mark appears next to the
setting. Once the desired selection is made,
either press the Back Arrow or the X button on
the touchscreen to close the settings screen.
Pressing the Up or Down Arrow buttons on the
touchscreen allows you to toggle through the
available settings. The list of programmable
features include:
NOTE:
All settings should be changed with the ignition
in the “ON/RUN” position.
KeySense
This feature allows you to control specific
settings when the KeySense key is in use. The
vehicle’s KeySense settings are protected by a
unique 4-digit PIN, which the vehicle owner
creates when accessing the specific settings for
the first time. This 4-digit PIN can only be reset
by an authorized dealer.
After pressing the KeySense button on the
touchscreen, and entering the KeySense PIN,
the following settings will be available:
Setting Name Selectable Options
ParkSense — If Equipped Sound Only Sound and Display
NOTE:
The “ParkSense” system setting will scan for objects behind the vehicle when the transmission gear selector is in REVERSE (R) and the vehicle speed
is less than 7 mph (11 km/h), when enabled. It will provide an alert (audible and/or visual) to indicate the proximity to other objects. The system can
be enabled with “Sound Only” or “Sound and Display.”
Front ParkSense Volume Low Medium High
Rear ParkSense Volume Low Medium High
Rear ParkSense Braking Assist On Off
NOTE:
When the “Rear ParkSense Braking Assist” feature is selected, the Park Assist system will detect objects located behind the vehicle and utilize auton-
omous braking to stop the vehicle.
9
20_RU_OM_EN_USC_t.book Page 393
Loading ...
Loading ...
Loading ...