Loading ...
Loading ...
Loading ...
washing a load of laundry _21
02 WASHING A LOAD OF LAUNDRY
Signal selection
button
Press the button to increase or decrease the end of cycle signal volume or
turn off the signal.
(Off Æ S Æ Softer Æ T Æ Louder)
Start/Pause
selection button
Press to pause and restart programs.
Power button
Press once to turn your washer on, press again to turn your washer off. If
the washer is left on for more than 10 minutes without any buttons being
touched, the power automatically turns off.
Child lock
A function that prevents children from playing with your washer.
Once the Child Lock function is activated, the control panel cannot be activated, preventing
children from playing with the washer.
ACTIVATING/DEACTIVATING
If you want to activate/deactivate the Child Lock function, press the Soil Level and Signal
buttons at the same time for 3 seconds.
How It works:
1. To activate or deactivate the Child Lock function, press and hold both the Soil level and
Signal buttons for 3 seconds. Activation/Deactivating the Child Lock function is only available
when the power is on.
2. When the Child Lock function is activated, and any button except for the Power button is
pressed, the buzzer will sound for a short period and the “Child Lock” indicator will turn off
for 10 seconds.
3. The Child Lock function stays on even after the power has been turned on and off or the
power cord has been disconnected and reconnected.
When buttons, other than the Power button, do not respond, please check if the Child
Lock function is on.
Garment+
You can add or take out laundry items even after the wash has started, as long as the
“Garment+ ” light is turned on. Pressing the Start/Pause button unlocks the door, unless the
water is too hot or if there is too much water in your washer. If you are able to unlock the door
and wish to continue the wash cycle, close the door and press the Start/Pause button.
My cycle
Allows you to activate your custom wash (temperature, spin, soil level, etc.) with one–button
convenience.
By pushing the My Cycle button, you activate the settings used during the My Cycle mode. The
“My Cycle” light will indicate activation.
You can select all options as follows in the My Cycle mode.
1. Select cycle using the Cycle Selector.
2. After cycle selection, set each option.
See page 33 for available option settings with each cycle.
3. Then, you can store the cycle and options you select by pressing the Start/Pause button
in the My Cycle mode. The cycle and options you select will be displayed the next time you
choose the My Cycle function.
You can change the My Cycle settings by repeating the same process above.
The last used setting will be displayed the next time you choose the My Cycle function.
7
8
9
WF409ANW-02657D-04_EN.indd Sec5:21WF409ANW-02657D-04_EN.indd Sec5:21 2011-04-25 11:44:282011-04-25 11:44:28
Loading ...
Loading ...
Loading ...