Loading ...
Loading ...
Loading ...
..... • ...... .
Using the Air Conditioner
NOTE: If the air conditioner isturned off,
wait 3 minutes before restarting This
allows pressure inside the compressor to
equalize Failure to follow these
instructions may cause inefficient
operation.
To reduce the risk of fire, electric shock, or injury to persons, read the
IMPORTANTSAFETYINSTRUCTIONSbefore operating this appliance
To begin operating the air conditioner, follow these steps:
I, Plugin the air conditioner (Toprevent electrical hazards, do not usean extension
cord or an adapter plug.)
2. Setthe exhaust vent to the CLOSEDposition
3, Setthe TEMP Control to the coolest setting
4 Set the fan control at the highest level,
5 Adjust the louvers for comfortable air flow,
6. Once the room has cooled, set the fan to the POWERSAVERFAN setting and/
or adjust the TEMP Control to the setting you find most comfortable
Review the "Air Conditioner Features" section for other settings,
Air Conditioner Features
VENT
EXHAUST CLOSED
Kenmore
FAN
OFF
HIGH
/
MED. (i_
LOW
POWER
SAVER
HIGH
4
MED,
LOW
NORMAL
TEMP
COOLER
HEAVY DUTY
The controls featured in this manual are representational of the many models
available. Your model may took slightly different.
TEMP Control
TheTEMPControl servesasthe thermostat to setthe degree of room coolness, Turn
the knob clockwise from thin rule to thick rule to increase the cooling temperature,
FILTER MONITOR (some models)
Tocheck filter monitor:
1. Set NORMAL fan control to HIGHsetting
2. If fitter needs cleaning, a RED indicator will appear in the filter monitor
window A clean filter will help reduce operating costs and increase cooling
efficiency
NORMAL Fan
When in the NORMAL Fansetting, the air conditioner runs all the time, circulating
the air, Cooling starts only if the room temperature rises above the coolness level
selectedon the TEMPControl, and stops once the set coolnesslevel isreached This
setting gives the most even room temperatures
POWER SAVER Fan (some models)
The POWERSAVERFancan saveenergy In this setting, the fan will not run unless
the TEMPControl issetcolder than the room temperature, When the TEMPControl
isset colder than room temperature, the air conditioner will begin to circulate the
air in the room Cooling will begin in about 3 minutes, The air conditioner turns off
automatically when the room reachesthe levelof coolnessselected, HIGHisfor fast
cooling, MED isfor normal cooling, and LOW is for quiet cooling
HEAT (some models)
TheHEATselection provides quiet, efficient circulation of warm air, Turnthe selector
to the HEATsetting and set the thermostat to the warmest setting, When the HEAT
COOL
OFF " .... :
•HIGH
LOW LOW
HEAT
HEATContro! (somemodels)
FAN TEMP
POWER NORMAL
SAVER OFF
HIGH_.. HIGH
MED.(_ j MED. IQ_ ii!'l,i)i:i::
LOW LOW
Side Air Model Control Panel
VENT
CLOSED
EXHAUST
Loading ...
Loading ...
Loading ...