Loading ...
Loading ...
Loading ...
Always follow all safety precautions when performing maintenance to the PowerMate.
_k WARNING
ElectricalShockOr PersonalInjury Hazard
Always turn off and unplug vacuum
cleaner before performing maintenance
to the vacuum cleaner. Failure todo so
could resultin electrical shockor personal
injury from vacuum cleaner suddenly
starting.
BELTCHANGING AND AGITATOR CLEANING
TO REMOVE BELT
1.TurnPowerMate upsidedown and remove
six (6) screws.
2. TurnPowerMate right side up. Press
handle release pedal and lower the swivel.
Loosen the rear latches located below the
pedals. (A flat-head screwdriver may be
required.)
Rear
Handle
Release
Rear Latch
3. To remove
cover, grasp the
rear and pull
up.
4. Lift off
agitator
cover
Agffa_or Cover/_
5. Lift agitator
assembly out
and remove
worn belt.
Agitator-
6. Check and clean end cap areas. See
AGITATOR ASSEMBLY(page 21)for picture
of complete agitator assembly.
- 20 -
Loading ...
Loading ...
Loading ...