Loading ...
Loading ...
Loading ...
DUST BAG CHANGING
For best cleaning results, the dust bag
should be changed often. The CHECK BAG
indicator will come on when the bag needs
to be changed or the airflow is blocked.
NOTE: See REPLACEMENTPARTSfor part
number detail (page 5).
1.Turnoff and unplugvacuum cleaner.
2. Remove hose from canister.
3. Pull hood release out and up, then lift
canister hood.
Hood
4. Pullbag out of the bag mount.
Mount
Note: The bag mount will flip forward
after removing bag. This will prevent the
hood from closing until a new bag is
installed.
5. Check the motor safety filter and
replace, if necessary. See MOTOR SAFETY
FILTERCLEANING (page 18).
Motor Safety
Filter
DO NOT bend or crease the middle of the
cardboard when installing the bag intothe
bag mount slots.
6. Rotate bag mount down and install bag
intoslotsper illustration,pushing clown until
the cardboard tab locks into position and
the holes align.
7. Tuckthe bag securelyinto the bag cavity
so that none of the bag will be pinched by
the hood.
8. Close and latch canister hood.
9. Inserthose into canister until it snapsin
place.
10. Plug cord into wall outlet.
_IL CAUTION
NEVER REUSEA DUST BAG. Very fine
materials, suchas carpet freshener,face
powder, fine dust, plaster, soot,new
carpet lint, etc. can clog the bag and
cause it to burstbefore it isfull, which
may damage the vacuum cleaner motor.
Change bag more oftenwhen vacuuming
these materials.
-17-
Loading ...
Loading ...
Loading ...