Loading ...
Loading ...
Loading ...
13
OPERATION INSTRUCTIONS
TIMER (DELAYED SWITCH ON / OFF) FUNCTION
This function mode enables a delayed switch ON or delayed switch OFF of the air conditioner. The time (hours) de-
lay can be set, enabled and disabled. The timer is adjustable between 1 - 24 hours.
SETTING SWITCH OFF TIMER
With the air conditioner operating in any function mode, press the Timer button. The display timer setting
will come on. Set the desired time delay OFF hours by pressing the and buttons. The time increments
are at 1 hour to up to 24 hours. When the delay time set has elapsed, the air conditioner switches off. To cancel the
delayed switch off function, press the Timer button or turn off the air conditioner.
SETTING DELAYED SWITCH ON TIMER
With the air conditioner is off, press the Timer button. The display timer setting will come on. Set the de-
sired time delay ON hours by pressing the and buttons. The time increments are at 1 hour to up to 24
hours. When the delay time set has elapsed, the air conditioner switches on. To cancel the delayed switch on func-
tion, press the Timer button or turn on the air conditioner.
AUTO RESTART
In the event of a power outage, the air conditioner restarts at the previously set function mode and settings when
power is restored.
NOISE LEVEL
Portable air conditioners may make sounds that are not familiar to you. The sounds listed below are normal. Noise
reflecting off hard surfaces such as a floor or wall can make the sounds seem louder than they actually are.
The compressor may make a pulsating or high-pitched sound
Water running from the evaporator to the water tank may make a splashing sound
Refrigerant flowing may make a gurgling sound
Fan sound may come from front and back air vents
COMPRESSOR LOCK OUT
This portable air conditioner is optimized to operate in an ambient temperature of 64°F – 90°F. The compressor cir-
cuit has an automatic 3 minute time delayed start if the unit is turned off and on quickly. This prevents over-heating of
the compressor and possible circuit breaker tripping.
WATER DRAINAGE
During the process of cooling, some water will be extracted from the air into the unit. Most of this water is used to
cool and exhausted to the outside. If the unit is operated in high humidity or low temperature environment, water will
be collected in the reservoir inside the unit. If the reservoir is full, the compressor will stop. To continue the cooling
function, please drain the water. See page 9.
Loading ...
Loading ...
Loading ...