Loading ...
Loading ...
Loading ...
en Home Connect
18
This is how to set up the energy
manager „:
1. Open the door.
2. Switch on ON/OFF switch (.
3. Press Info button { 8 for 3
seconds until the following text is
indicated on the display window at
the top @:
Scroll with < >
Set with - +
Leave with Setup 3 sec.
4. Keep pressing button > )R until the
required setting is indicated on the
display window at the top @.
5. Make the setting with setting buttons
+ - `.
6. In the next 2 minutes connect your
dishwasher with the energy manager
of the home system. When doing so,
also activate connection to the
energy manager of your home
system (observe the instruction
manual of your energy manager
manufacturer).
Following successful connection of the
dishwasher to the energy manager of
your home system, the following
message is indicated on the display
window at the top @. If login of the
energy manager is unsuccessful, please
repeat Step 6.
Note: The “Energy manager” menu
option is not available unless there was
a connection to the home network and
the appliance is connected to the app.
Further information and system
requirements for using the energy
manager can be found at
www.home-connect.com/energymana
gement
Activating energy manager „
Ac t i v a t i n g ener gy manager
To start the energy manager „ , you
must activate the remote start button }
)" and select time preselection h.
Once you have activated the remote
start button } )", you can use the
Home Connect app to perform time
preselection h.
You can also activate the energy
manager „ manually using the buttons
on the dishwasher.
This is how to activate the energy
manager „ on the dishwasher:
1. Open the door.
2. Switch on ON/OFF switch (.
3. Select programme 0.
4. Press time preselection button h.
5. Keep pressing the setting buttons + -
` until the displayed time
corresponds with your requirements.
6. Press START button )2. Time
preselection is activated.
7. Activate the remote start button }
)".
8. Following successful activation, @
“Flex Start” is indicated on the
display window at the top.
The energy manager „ now has
access to the dishwasher and can
start it during the time period
selected.
Note:
■ Where the energy manager „ starts
the programme earlier, the time
display “Ready in” / “Finish at” will
be updated.
■ To activate the energy manager „ ,
you must have set it up beforehand.
Loading ...
Loading ...
Loading ...