Loading ...
Loading ...
Loading ...
12
The pump is excessively noisy The water tank is empty Fill the tank
The tank is not correctly in place and the
valve on its base is not open
Press the tank down lightly to open the valve on
the bottom
There are air bubbles in the tank
connector
Follow the instructions given in the “Hot water”
section until water is delivered
The coee froth is too dark
(delivered from the spout too
slowly)
The pre-ground coee is pressed down
too rmly
Press the coee down less rmly
There is too much pre-ground coee Reduce the quantity of pre-ground coee
The espresso boiler outlet is blocked Clean as indicated in the “Cleaning” section
The lter is blocked Clean as indicated in the “Cleaning” section
The pre-ground coee is too ne or damp Use only pre-ground coee for espresso coee ma-
kers and make sure it is not damp
The wrong type of pre-ground coee is
being used
Use a dierent type of pre-ground coee
The coee has an acid taste Inadequate rinsing after descaling After descaling rinse the appliance as indicated in
the “Descaling and Rinse” section
Non si forma la schiuma del No
milk froth is formed when ma-
king cappuccino
Milk not cold enough Always use semi-skimmed milk at refrigerator
temperature.
Cappuccino maker dirty Clean the holes in the cappuccino maker
thoroughly
Limescale in the water circuit Descale as described in the “Descaling” section
The appliance switches o Auto-o has been triggered Press the ON/OFF button to turn the appliance on
again
The appliance switches o a
few seconds after switching on
The functions selector is in the
(standby) position
Turn the functions selector to the
(standby)
position, then press the ON/OFF button.