BKA127SA User Manual

Loading ...

14 15

Specifications

Measurement system

Measurement range 5-500 m/6-550 yds.

Distance display (increment) Every 1 m/yd.

Optical system

Magnification (x) 6

Effectivediameterofobjectivelens

(mm)

Angular field of view (real) (˚) 6.0

Eyerelief(mm) 16.7

Exitpupil(mm) 3.3

Diopter adjustment ±4m

Others

Operating temperature (˚C) -10—+50

Powersource CR2 lithium battery x 1 (DC 3V)

Dimensions(LxHxW)(mm) 91 x 73 x 37

Weight(g) Approx. 125 (without battery)

Structure

JIS/IECprotectionclass4(IPX4)equivalent(under

our testing conditions)*

Safety

Class1MLaserProduct(EN/IEC60825-1:2007)

Class I LaserProduct(FDA/21CFRPart1040.10:1985)

EMC

FCCPart15SubPartBclassB,EU:EMCdirective,

AS/NZS, VCCI classB

Environment RoHS,WEEE

Meter [ ]Yard [ ]

1. Turn on the power (Confirm the internal display is on).

2.PressandholdtheMODEbuttonformorethantwoseconds.

Whenthedisplayunithasbeenswitched,releasethebutton.

3. After the unit is set, results will be converted and displayed in

the selected distance display unit.

Distance display units

Measurement results are displayed in yards/meters.

(Factory default setting is yard.)

This Laser Rangefinder has a First

TargetPrioritySystem.Whenmeasuring

overlapping subjects, this equipment

displays the distance to the closest subject.

Target priority mode

Others

This Nikon Laser Rangefinder is a basic rangefinder. Its results cannot be used as official evidence.

ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuanttoPart15ofthe

FCCRulesandtoEUEMCdirective.Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterference

in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following measures:

•Reorientorrelocatethereceivingantenna.

•Increasetheseparationbetweentheequipmentandreceiver.

•Consultthedealeroranexperiencedradio/TVtechnicianforhelp.

ThisClassBdigitalapparatusmeetsallrequirementsoftheCanadianInterference-CausingEquipmentRegulations.

ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation.

Loading ...

User Manual - Page 8