Loading ...
Loading ...
Loading ...
Faults – what to do? en
45
--------
Display flashes.
The temperature in the freezer compartment was
too warm.
When button alarm has been pressed, the warmest
temperature reached in the freezer compartment is
displayed for 5 seconds. Press the alarm button.
The display stops flashing.
Appliance is not cooling, display and lighting are lit.
Showroom mode switched on. Start the appliance self-test.
~ "Appliance self-test" on page 46
When the programme has ended, the appliance
switches over to normal operation.
Automatic super freezing does not switch on.
The appliance decides independently whether auto-
matic super freezing is required and switches it on or
off automatically.
It is too warm or too cold in the cool-fresh compartment.
The standard setting has been set too high or low
(e.g. frost in the cool-fresh compartment).
You can set the temperature in the cool-fresh com-
partment to be 3 settings warmer or colder. If the
temperature in the refrigerator compartment is set
to setting 0, the cool-fresh compartment has a tem-
perature of around 0 °C.
1. Press and hold the refrigerator
compartment super button until the display tem-
perature refrigerator compartment flashes.
2. Press ¾/¿ button to change the setting.
Setting –3 corresponds to the coldest setting.
Setting +3 corresponds to the warmest setting.
The selected setting is saved after one minute.
Loading ...
Loading ...
Loading ...