Loading ...
Loading ...
Loading ...
OPERATIONAL INSTRUCITONS
USING THE FITNESS METER
POWER ON: Pedal movement or press the button.
POWER OFF: Automatically shuts off after four minutes of inactivity.
MODE BUTTON:
Press to select display functions, including SCAN, TIME, SPEED, DISTANCE,
CALORIES, ODOMETER, and PULSE.
Press and hold for two seconds to reset all functions to zero, except ODOMETER.
FUNCTIONS:
SCAN: Automatically scans each function of TIME, SPEED, DISTANCE, CALORIES,
ODOMETER, and PULSE in sequence, display changes every six seconds. Press and release the button
until “SCAN” appears on the display.
TIME: Displays the time from one second up to 99:59 minutes.
SPEED: Displays the current speed from zero to 999.99 meters.
DISTANCE: Displays the distance from zero to 99.99 meters.
CALORIES: Displays the calories burned from zero to 999.9 Kcal. The calorie readout is an estimate for an
average user. It should be used only as a comparison between workouts on this unit.
ODOMETER: Displays the total accumulated distance you have traveled from zero to 999.9 meters. The
total accumulated distance is retained when the meter is turned off.
PULSE: Displays your pulse rate in beats per minute. To display pulse, select the PULSE mode and grasp
the pulse sensors on the handlebar, one in each hand. The heart icon will begin flashing when the
FITNESS METER senses your pulse. Your pulse will be displayed approximately five (5) seconds after the
heart icon is displayed. If the heart icon does not appear, relax your grip or change your grip on the pulse
sensors.
NOTE: 1. The meter will shut off automatically after four minutes of inactivity. All function values will be
kept. Press the button and hold it down for two seconds to reset all functions to zero, except ODOMETER.
2.The ODOMETER will be reset to zero after batteries are removed for battery replacement or storage of
the unit.
TIME
SPEED
DISTANCE
CALORIES
ODOMETER
SCAN
PULSE
MODE
Loading ...
Loading ...
Loading ...