Loading ...
Loading ...
Loading ...
OPERATIONALINSTRUCTIONS
STORAGE
• To store the BIKE, simply keep it in a clean dry place.
• To avoid damage to the electronics, remove the batteries before storing the BIKE for one year or more.
• To move the BIKE, hold the HANDLEBAR and tilt the BIKE onto the Wheels of the Stabilizer at the
front.
• Follow the illustrated process below to fold the BIKE.
•Remove the Pull Pin (43), fold the Rear Frame (2) forward. Insert the Pull Pin (43) back into the Rear
Frame (1) after folding.
•Remove the Pull Pin (43) from the Rear Frame (2).Fold the Rear Frame (2) close to the Main Frame (1)
and lock it in folded position with the Pull Pin (43).
NOTE: Make sure the Pull Pin (43) goes through the holes on both sides of the Rear Frame (2) and
the tube on the Main Frame (1).
A.
14
3
2
43
43
2
1
The safety and integrity designed into the BIKE can only be maintained when t h e BIKE is regularly
examined for damage and wear. Special attention should be given to the following:
1. Adjust the 8 Section Adjustment Knob (51) and verify that it functions properly and the resistance
changes.
2. Use a wrench to verify that the pedals are tightened securely. If tightening is required, remember that
the left pedal has left hand threads and is tightened by turning counterclockwise.
3. Verifythatallnutsandboltsarepresentandproperlytightened.Replacemissingnutsandbolts. Tighten loose
nuts and bolts.
B.
Loading ...
Loading ...
Loading ...