Loading ...
Loading ...
Loading ...
ASSEMBLY INSTRUCTION
ASSEMBLY INSTRUCTION
STEP 5: Insert the Meter (17) onto the iron sheet of Handlebar (4), then connecting Meter
Transmission Wire (72) and Hand pulse Line (19).
STEP 6: Insert the Handlebar (4) into the Rear Frame (3), then secure the Adjustment Knob(33)
with the Screw, Round Head (M6 *1* 12mm) (65) the handlebar on the Rear Frame (2)
with Hex Head Bolts M6 (80)
STEP7: Lock and tight the Left Pedal (37) and Right Pedal (46) on the Left Crank (38) and Right
Crank (45) by using the Wrench (93).
17
4
72
17
4
33
24
65
53
3
38
37
46
FUNCTION INSPECTION:
Visually inspect the Bike to verify that assembly is as shown in the above illustration.
Check the function of the Bike by turning the c rank s lowly through one complete revolution to
verify that the drive train functions properly. Adjust the Adjustment Knob (33) and verify that it
functions properly and the resistance changes.
Loading ...
Loading ...
Loading ...