Loading ...
Loading ...
Loading ...
Platinum by Tunturi 16 4 in 1 Strength Station Owner's Manual
• Adjust cables to proper tension from any of the locations shown below.
Note: All cables with threaded adjustable ends must have at least 1/2” of the threads threaded in to its counter-
part. It is very important that the 1/2” Jam Nut be wrench tightened to the counterpart to ensure that the threaded
adjustable end of the cable does not back out of its counterpart.
• Note: If the top plate raises off of the second plate in the weight stack, then the cable tension is too tight. You will need to take
some of the tension out to lower the Top plate flush with the second plate.
Cable Adjustments
This bolt can be
positioned in any one of
the three optional holes
to account for any slack
in the cable. Refer to
Step 5.
Fine adjustments to cable
tension can be made here.
At least 1/2” of the threads
should be threaded in to
the top weight plate. It is
very important to tighten
the jam nut after
adjustments.
PG6251說明書101025---001 拚版用-12.indd 17-18 2010/11/4 9:37:53
Loading ...
Loading ...
Loading ...