Loading ...
Loading ...
Loading ...
Platinum by Tunturi 10 4 in 1 Strength Station Owner's Manual
Figure 2
Step 2:
All Flat Washers and Nylocks are 3/8” unless otherwise noted.
Do Not Tighten Hardware
U
ntil Next Step.
Item # Description Qty
7 PulleyHolder/Support Plate 2
8 Upper Support Brace (Right) 1
9
Extended Upper Support Brace (Left Side)
1
27 HCS 3/8”-16 x 2 1/2 4
28 HCS 3/8”-16 x 5 1/4 2
40 3/8” Flat Washer 12
41 3/8” Nylock 6
Step 2a:
Repeat step 2 for
opposite (Left) side
Extended Upper
Support Brace
NOTE: Attach the Pulley
Holder/Support Plates to the Upper
Support Brace loosely BEFORE
installing the Upper Support Brace.
This will help continue to make the
installation process effortless.
N
ote: Be sure to remove the 3/8” x 5”
bolts from the top of the Lower Body
Station and the Upper Body Station
and use the 3/8” x 5 1/4” bolts
provided with the Functional Trainer.
www.tunturi.com 11 4 in 1 Strength Station Owner’s Manual
Item # Description Qty
10 Front Angle Bracket 1
11 Rear Angle Bracket 1
29 FHSCS 3/8”-16 x 3” 2
30 FHSCS 3/8”-16 x 5 1/4 2
40 3/8” Flat Washer 4
41 3/8” Nylock 4
All Flat Washers and Nylocks are 3/8” unless otherwise noted.
Step 3:
Figure
Make Sure to
T
ighten All
H
ardware Before
M
oving to the
N
ext Step.
Platinum by Tunturi 14 4 in 1 Strength Station Owner's Manual
269 11/16”
CAB-13033
Step 5 Continued:
Note: Cables CAB-13033 has a removable Cable Strap end to make cable routing easier. The Cable Strap ends can
be found packaged with the hardware.
Start Here
www.tunturi.com 15 4 in 1 Strength Station Owner’s Manual
Figure 6
Item # Description Qty
18 Short Bar/Ankle Strap Holder 1
19 Front Shroud 1
20 Rear Shroud 1
21 Rope/Long Bar Holder 1
36 HCS 3/8”-16 x 2 1/4” 1
38 HCS 3/8”-16 x 1/2” 4
39 3/8” Lock Washer 5
41 3/8” Flat Washer 5
All Flat Washers and Nylocks are 3/8” unless otherwise noted.
Step 6:
Step 6a:
Repeat step 6 for
opposite (Left) side
PG6251說明書101025---001 拚版用-12.indd 21-22 2010/11/3 20:38:30
Loading ...