Dji FPV User Manual

Loading ...

Aircraft

Goggles Remote Controller

Product Prole

Introduction

DJI FPV consists of an aircraft, goggles, and remote controller, which all feature DJI’s O3 technology that provides

video transmission with a maximum transmission range of 6 mi (10 km), bit rate of up to 50 Mbps, and minimum

end-to-end latency within 28 ms. DJI FPV works at both 2.4 and 5.8 GHz and is capable of selecting the best

transmission channel automatically. The enhanced anti-interference ability greatly improves the smoothness and

stability of the video transmission, providing an integrated and immersive ight experience.

Featuring a Forward and Downward Vision System and Infrared Sensing System, the aircraft can hover and y

indoors as well as outdoors and automatically initiate Return to Home (RTH). With a gimbal and 1/2.3” sensor

camera, the aircraft stably shoots 4K 60fps ultra-HD video and 4K photos. The aircraft has a maximum ight

speed of 87 mph (140 kph) and a maximum ight time of approximately 20 minutes.

The DJI FPV Goggles V2 are equipped with a high-performance display and support 810p 120fps HD display and

real-time audio transmission. By receiving the video signal from the aircraft, users can enjoy a rst-person view of

their aerial experience in real time. The goggles have a maximum runtime of approximately 1 hour and 50 minutes

when used with DJI FPV Goggles Battery and where the ambient temperature is 25° C and the screen brightness

is set to 6.

The DJI FPV Remote Controller 2 is equipped with a range of function buttons, which can be used to control the

aircraft and operate the camera. The maximum runtime of the remote controller is approximately 9 hours.

The remote controller reaches its maximum transmission distance (FCC) in a wide-open area with no

electromagnetic interference when the aircraft is at an altitude of approximately 400 ft (120 m). The

maximum transmission distance refers to the maximum distance that the aircraft can still send and

receive transmissions. It does not refer to the maximum distance the aircraft can y in a single ight.

The end-to-end latency is the total time from camera sensor input to screen display. The DJI FPV

can reach its minimum latency in Low Latency mode (810p 120fps) in a wide open area with no

electromagnetic interference.

Maximum ight time was tested in an environment with no wind while ying at a consistent 24.9 mph

(40 kph) and the maximum ight speed was tested in Manual mode at sea level altitude with no wind.

These values are for reference only. The maximum ight speed of the aircraft varies depending on

national and regional regulations.

Loading ...

Dji FPV Camera