Loading ...
Loading ...
Loading ...
DJI FPV
User Manual
23
© 2021 DJI All Rights Reserved.
e) Flying in an area where the lighting changes frequently or drastically.
f) Flying over extremely dark (< 10 lux) or bright (> 40,000 lux) surfaces.
g) Flying over surfaces that strongly reect or absorb infrared waves (e.g., mirrors).
h) Flying over surfaces without clear patterns or texture. (e.g., power poles).
i) Flying over surfaces with repetitive identical patterns or textures (e.g., tiles with the same design).
j) Flying over obstacles with small surface areas (e.g., tree branches).
Keep the sensors clean at all times. DO NOT tamper with the sensors. DO NOT use the aircraft in
environments with signicant dust or humidity. DO NOT obstruct the Infrared Sensing System.
The camera must be calibrated if the aircraft is involved in a collision. Calibrate the cameras if prompted
to do so in the goggles.
DO NOT y when it is rainy, foggy, or if there is no clear sight.
Check the following every time before takeo:
a) Make sure there are no stickers or any other obstructions over the Infrared Sensing System or
Vision Systems.
b) If there is any dirt, dust, or water on the Infrared Sensing System or Vision Systems, clean with a
soft cloth. DO NOT use any cleanser that contains alcohol.
c) Contact DJI Support if there is any damage to the glass of the Infrared Sensing System or Vision
Systems.
Flight Recorder
Flight data including ight telemetry, aircraft status information, and other parameters are automatically saved to
the internal data recorder of the aircraft. The data can be accessed using DJI Assistant 2 (DJI FPV series).
Propellers
There are two types of DJI FPV Quick-Release Propellers, which are designed to spin in dierent directions. Marks
are used to indicate which propellers should be attached to which motors. Make sure to match the propeller and
motor following the instructions.
Propellers With Marks Without Marks
Illustration
Mounting Position Attach on motors with marks Attach on motors without marks
Attaching the Propellers
Attach the propellers with marks to the motors with marks and the unmarked propellers to the motors without
marks. Hold the motor, press the propeller down, and rotate in the direction marked on the propeller until it pops
up and locks in place.
Loading ...
Loading ...
Loading ...