Dji FPV User Manual - Page 42/67

Loading ...

DJI FPV

User Manual

Manual mode is disabled by default. Make sure that the switch is set to Manual mode in the goggles before

switching to Manual mode. The aircraft will remain in Normal or Sport mode if the switch is not set to Manual

mode in the goggles. Go to Settings, Control, Remote Controller, Button Customization, and set the Custom

Mode to Manual mode.

Before using Manual mode, it is recommended to tighten the F2 screw on the rear of the throttle stick so that the

stick does not return to the center and adjust the F1 screw to make sure the stick resistance is suitable.

When using Manual mode, the aircraft has no flight assistance functions such as automatic

stabilization. Before using Manual mode, practice flying in Manual mode using DJI Virtual Flight to

ensure that you can y safely.

Only adjust the throttle stick before the aircraft takes o. DO NOT adjust during ight.

Start/Stop Button

When using Sport mode, press once to enable or disable cruise control. When cruise control is enabled, the

aircraft will maintain the current ight speed and y forward.

When using Manual mode, press twice to start or stop the motor.

When using Normal or Sport mode, press once to cancel Low Battery RTH when the countdown appears in the

goggles.

Cruise control is only available in Sport mode.

When cruise control is enabled, the aircraft will maintain the current flight speed in the horizontal

forward direction. The horizontal speed displayed on the goggles will change accordingly if the control

sticks are moved or if the aircraft is ying in a windy environment.

Flight Pause/RTH Button

Press once to make the aircraft brake and hover in place. Make sure that the pitch stick and roll stick return to the

center and push the throttle stick to resume control of the ight. If the aircraft is performing RTH or auto landing,

press once to exit RTH before braking.

When the aircraft is in Manual mode, press the button to make the aircraft brake and hover in place. The aircraft

attitude returns to level and the ight mode automatically switches to Normal mode.

Press and hold the RTH button until the remote controller beeps to indicate that RTH has started. Press the

button again to cancel RTH and regain control of the aircraft. Refer to the Return to Home section for more

information about RTH.

Loading ...

Dji FPV Camera