Loading ...
Loading ...
Loading ...
8
STEP 3 ASSEMBLE GUIDE ROD AND WEIGHT PLATE
52
52
12
18
61
61
50
64
61
64
19
20
21
3
37
30
51
59
2L
59
9
1. Insert two plastic Guide Rod Holders (66) into the base of Left Main Upright (2L).
2. Slide a Rubber Cushion (37) onto one end of each Guide Rods (3), then insert the Guide Rods (3)
into the Left Main Upright (2L) as shown.
3. Slide 10 each 10 lbs Weight Plates (21), then 10 each 5 lbs Weight Plates onto the Guide Rods (3).
Make certain that each plate is oriented with the concave surface facing inside. Attach the Top
Plate (18) to the Selector Rod (19) using the Top Plate Bolt (51). Slide the Top Plate (18) and
Selector Rod (19) onto the Guide Rods (3).
4. Attach Top Guide Rod Holder (9) to the top end of Guide Rod (3) and secure to the top of the Left
Main Upright (2L), using two 3/8" X 3/4" Round Set Screws (50) and two 3/8" Washers (61).
5. Attach a Pulley bracket (12) to the Top Plate (18) using two 3/8" X 1" Inner Hex Screws (52), two
3/8" Washers (61), and two 3/8" Nylon Nuts (64). Repeat the procedure for the
right side.
37
Loading ...
Loading ...
Loading ...