Loading ...
Loading ...
Loading ...
Assembly is complete! Please take the following steps before using the gym:
1. Make certain all bolts are tightened securely.
2. Make certain all cables are seated into all pulley grooves. A cable rubbing
against steel will peel the nylon coating, voiding warranty and resulting in a
need for replacement.
3. Pre-stretch the cables. Put the Weight Selector Pin (30) in the bottom hole on
the weight stack. Pull on the cables with great force, helping remove any
kinks and providing any initial cable stretch.
4. Be aware the cables can loosen and slightly stretch upon initial use.
5. The cables should be adjusted as tight as possible, but no so tight as to lift
the Top Plate (18) above the weight stack. Be certain to secure the jam nuts
after adjustments are made.
6. For better performance, apply a household lubricant (such as silicone) to any
adjustable areas and to the Guide Rods (3).
7. Enjoy many years of a Fit Lifestyle.
Thank you for purchasing the BodyCraft PFT Cable Gym. If
you have any questions, please call your local BodyCraft dealer,
call our customer service department at 800-990-5556 or at
http://www.bodycraft.com.