Loading ...
Loading ...
Loading ...
Time and Auto Microwave Features
BASIC CONTROLS
Learn about your microwave oven.
CAUTION
To avoid risk of personal injury or property damage, do not operation the microwave oven empty.
To avoid risk of personal injury or property damage, do not use stoneware, aluminum foil, metal
utensils, or mental trimmed utensils in the microwave oven.
Function description:
¾ During cooking, if press Stop/Cancel pad once or open the door, the program will bepaused, close
the door and then press Start/Add 30Sec pad to resume, but if press Stop/Cancel pad twice, the
program will be canceled.
¾ After ending cooking, “END” will display and the system will sound beeps to remind user every two
minutes until user press Stop/Cancel pad or open the door.
¾ SIGNALS DURING OVEN SETTINGS
ONE SIGNAL: Oven accepts the entry.
TWO SIGNALS: Oven does not accept the entry, please check and try again.
Setting the Clock
Example: Suppose you want to set the clock for 5:00 pm.
1. In standby mode, press Clock pad once, “Enter Time of Day” will cycle display.
2. Press number pad enter time.
3. Press Start/Add 30Sec to conrm. The display cycle shows “AM Press 1 PM Press 2”.
4. Press number pads “2”. “PM 5:00” will display.
5. Press Start/Add 30Sec to conrm.
NOTE: This is a clock in 12 hour cycle. For initial power-up, “AM 12:00” will display. During cooking, you can press
CLOCK pad to check the current time of the clock.
Setting Microwave cooking program
For microwave cooking, cooking power level and time should be set. The longest cooking time you can set is 99
minutes and 99 seconds. Press Power Level pad once and then press number pads to choose cooking power level.
Use number pad to choose cooking power level
Number pad Number pad Number pad Percent (Name)
1,0 100% (High) 4 40% (Medium Low)
9 90% (Sauté) 3 30% (Defrost)
8 80% (Reheat) 2 20% (Low)
7 70% (Medium High) 1 10% (Warm)
6 60% (Simmer) 0 0% (No Power)
5 50% (Medium)
29-6291 9
USING YOUR OVEN: Time and Auto Microwave Features
Loading ...
Loading ...
Loading ...