Loading ...
Loading ...
Loading ...
6-2
For emergencies
6
If the vehicle breaks down
N00836300174
If your vehicle breaks down on the road, move to the shoulder
and turn on the hazard warning flashers. If there is no shoulder,
or the shoulder is not safe, drive in the right lane slowly, with
the hazard lights flashing, until you come to a safe stopping
place. Keep the flashers flashing.
If the engine stops/fails
If the engine stops, there will be no power assist to the steering
and brakes, making these difficult to use.
● The brake booster will not work, so the brakes will not
grip well. The brake pedal will be harder to press than
usual.
● Since there is no power steering assist, the steering wheel
will be hard to turn.
When the engine fails at the intersection
Get help from your passengers, bystanders, etc. to push the
vehicle and move it to a safe zone.
Jump-starting the engine
N00836400696
If the engine cannot be started because the battery is weak or
dead, you can start it with the battery from another vehicle
using jumper cables.
1. Take off any metal jewelry such as watch bands or brace-
lets that might make an accidental electrical contact.
2. Position the vehicles close enough together so that the
jumper cables can reach, but be sure the vehicles aren’t
touching each other.
WARNING
!
● When using jumper cables to start a vehicle, follow
the procedures and be very cautious.
CAUTION
!
● Do not try to start your vehicle by pushing or tow-
ing. Vehicles with automatic transaxles cannot be
started this way. Pushing or towing a vehicle that
has a manual transaxle may overheat and damage
the catalytic converter. Also, there is more risk of an
accident when a vehicle is being pushed or towed.
CAUTION
!
● Check the other vehicle. It must have a 12-volt bat-
tery. If the other system isn’t 12-volt, both systems
can be damaged.
BK0139500US.book 2 ページ ２０１１年４月１９日 火曜日 午後１時４８分
Loading ...
Loading ...
Loading ...