Loading ...
Loading ...
Loading ...
Features and controls
3-125
3
Programming HomeLink
®
To program HomeLink
®
to operate a garage door, gate, or
entry door opener, home or office lighting, you need to be at
the same location as the device.
N
OTE
● Some garage door openers manufactured after 1996 have
“rolling code protection”. To program a garage door
opener equipped with “rolling code protection”; you will
need to access the garage door opener motor to press the
motor’s learn buttons. For convenience, use a ladder and
another person to assist you.
1. Unplug the device during the “cycling” process to prevent
possible damage to the garage door opener components.
2. Press and hold the 2 outer HomeLink
®
buttons (A) (to
clear the memory) until the indicator light (B) blinks
slowly (after 20 seconds). Release both buttons.
3. Position the end of the hand-held transmitter 1 to 3 inches
(25 to 75 mm) away from HomeLink
®
surface.
4. Using both hands, simultaneously press and hold both
HomeLink
®
button (C) you want to program and the
hand-held transmitter button (D). Do not release the but-
tons until step 5 has been completed.
BK0139500US.book 125 ページ ２０１１年４月１９日 火曜日 午後１時４８分
Loading ...
Loading ...
Loading ...