Loading ...
Loading ...
Loading ...
20
INSTALLATION INSTRUCTIONS
door.
Make sure to remove the spring with the interlock
button and to keep the two together. Set the interlock
button aside. Do not confuse these with the interlock
buttons from the top of the outer door.
Remove the side lock rod from the lower hinge
bracket by lifting the top end of the rod and sliding it
toward the top of the door. The spring should remain
attached to the lock rod. Set the lock rod aside.
Spring
a. Slide the lock rod to the right to remove it from the
hinge assembly on the left side.
b. While sliding the lock rod right, lift the right end up
and out of the guides.
NOTE
Do not remove the two inner lock rods and two
the top lock rod. They do NOT need to be reversed.
Once the top lock rod has been removed, the
hinge pivot can easily be removed from the hinge
assembly on the upper left and set aside.
Upper
hinge
pivot
Upper hinge
assembly
Lift out the upper hinge filler (on the right) and set it
aside.
Carefully lift the upper hinge assembly (on the left)
out of the outer door frame, using a small flat blade
screwdriver if necessary. Rotate the hinge assembly
the outer door. You will need to press firmly to install
the hinge assembly.
later.
Upper hinge assembly
Upper hinge pivot
on the upper left side of the door.
Upper hinge filler
MFL67731059_en_170714.indd 20 2017.7.14 5:4:23 PM
Loading ...
Loading ...
Loading ...